Lubrication And Maintenance; Lubrication And Maintenance Chart; Maintenance And Lubrication Chart - Jacobsen CG2 Serie Manual De Seguridad, Funcionamiento Y Mantenimiento

8

LUBRICATION AND MAINTENANCE

8.1 LUBRICATION AND MAINTENANCE CHART

Interval
First 50 hours
Daily
10 hours
Weekly
Every 50 hours
Every 100
hours
Every 200
hours
Every 400
hours
End of season
Refer to Engine Manufacturers Manual for Additional Engine Maintenance Procedures
en-30
SAFETY AND OPERATION & MAINTENANCE MANUAL

MAINTENANCE AND LUBRICATION CHART

Item
Change Engine Oil.
Check Fan Belt Tension.
Check Engine Oil Level.
Check / Clean Air Filter Element.
Check / Clean Bug Screen / Radiator.
Check Engine Coolant Level.
Check Hydraulic Fluid Level.
Check Safety Interlock System.
Check Tyre Pressure.
Check Engine Bay for Debris.
Check Foot Pedal For Free Movement.
Check Battery Condition.
Check Hydraulic Fittings For Tightness.
Check Nuts & Bolts For Tightness.
Check Fan Belt Tension.
Check Air Filter Tell Tail Indicator*.
Check Fuel Filter For Water Contamination.
Change Engine Oil & Oil Filter.
Change Air Filter Element.
Replace Inline Fuel Filters.
Replace Fuel Filter Cannister.
Chech Rear Wheel Toe-in.
Change Hydraulic Oil & Filter.
Drain & Replace Engine Coolant.
Drain & Clean Fuel Tank.
Lubricate all Grease fittings weekly
* Check more often in dirty conditions
JACOBSEN FAIRWAY 305 Series CG2
IMPORTANT
Section
8.3
8.2
8.2
8.2
8.2
8.2
8.2
7.2
8.2
8.11
8.9
8.8
8.3
8.9
8.9
8.10
9.2
8.128.2
8.58.7