Engine Maintenance: Every 400 Hrs; Machine Maintenance - Jacobsen CG2 Serie Manual De Seguridad, Funcionamiento Y Mantenimiento

8 LUBRICATION AND MAINTENANCE
MAINTENANCE

8.10 ENGINE MAINTENANCE: Every 400 hrs

Changing fuel filter (Fig.14)
1. Unscrew filter (A) from filter head.
2. Remove water (B) separator from filter and
discard filter.
3. Fit water separator to new filter and refit
filter to head.
4. Bleed air from system as describe in
section 8.8.

8.11 MACHINE MAINTENANCE

Battery.
Keep fluid levels above battery plates.
WARNING
Wear eye protection when servicing battery.
Other Regular Service.
• Verify proper operation of safety interlock
switches (Neutral switch, Seat switch, etc.)
• Ensure nuts and bolts remain tight.
• Keep tyre pressure at 1kg/cm
• Follow the engine manufacturer's
maintenance recommendations.
• If a label becomes worn or removed, see
the LABELS section of this manual or the
tractor Parts Manual for replacement
information.
NOTE: When washing machine with pressure spray
washers or steam cleaners, avoid washing bearing
areas because cleaning solutions might penetrate
bearing seals and cause premature bearing failure.
JACOBSEN FAIRWAY 305 Series CG2
SAFETY AND OPERATION & MAINTENANCE MANUAL
Storage
•
•
•
•
•
2
(14psi).
Battery posts, terminals and related accessories
WASH HANDS AFTER HANDLING
Fig.14
Store petrol or diesel fuel in an approved
container in a cool dry place.
Keep the machine and fuel containers in a
locked storage place to prevent tampering
and to keep children from playing with
them.
Do not store fuel or petrol/diesel fuel
powered equipment in any closed area
where heating appliances, pilot lights or any
sort of open flame is present.
Before storing, allow the engine to cool, and
drain fuel completely from fuel tanks and
containers.
Maximum safety and best mowing results
can only be expected if the mower is
maintained and operated properly.
WARNING
contain lead and lead compounds.
en-39