Tabla de contenido
Idiomas disponibles
Idiomas disponibles
8.11 LUBRICATION ____________________________________________________________
The mower was designed for minimum lubrication. Over
greasing will produce high loads on the bearings and
engine, thereby reducing the performance of the
machine.
NOTICE
All maintenance intervals must be performed more
frequently
when
operating
conditions.
1. Always clean the grease fitting before and after
lubricating.
2. Apply grease with a manual grease gun and fill
slowly until grease begins to seep out. DO NOT use
compressed air guns.
3. For smooth operation of pivot points and other
friction points, apply several drops of SAE 30W oil.
8.12 MAINTENANCE CHART_____________________________________________________
Recommended Inspection and Lubrication Intervals.
Air Cleaner.......................................I ........................................C
Combustion Chamber........................................................................................................... C
Engine Oil ........................................I .................. R ........................................R.......................................... ...................... I
Fuel Line ............................................................................................................................................... R - 2 yrs
Spark Plug .....................................................................................................A/R
Valve Clearance.................................................................................................................... A
Grease Locations (Figure 7C)
1 - Roller .......................................................... L.................................................................................... L .................... II
2 - Height Adj. ........................................................................ L ............................................................................................ II
3 - RT Reel Shaft ............................................. L ...................................................................................... ..................... II
4 - Traction Roller............................................. L ...................................................................................... ..................... II
5 - Clutch Shaft Bearing .......................................................................................................................... L.................... II
6 - Clutch Pivot Shaft .............................................................................................................................. L....................III
7 - Clutch Needle Bearing ........................................................................................................................ ................... III
8 - Traction Hub ........................... ................... L ...................................................................................... .....................III
9 - Wheel Bearings ............................................................................................................ .................... L .................... II
10 - Reel Clutch Lever ..................................... L ...................................................................................... ..................... II
11 - Chain Case ................................................................................................................. ....................R....................IV
Lubricants
I
- SAE 10W-30 Classified API SF or SG.
II
- Lithium Grease NLGI - Grade 2.
III - Lubriplate® grease, Jacobsen Part No. 5001581
IV - SAE EP-140 Oil - Drain and Refill
- Apply a light coat
All manuals and user guides at all-guides.com
in
extremely
dusty
Daily
20
A - Add or Adjust
C - Clean
MAINTENANCE
8
9
2
1
3
50
100
300
I - Inspect
L- Lubricate
11
4
5
10
7
6
1
2
Figure 8D
Yearly
Lubricant
R - Replace
8
en-31
Capítulos
Tabla de contenido
Solución de problemas
