3
SAFETY INSTRUCTIONS
DANGER - Indicates an imminently hazardous
situation which, if not avoided, WILL result in death
or serious injury.
WARNING - Indicates a potentially hazardous
situation which, if not avoided, COULD result in death
or serious injury.
CAUTION - Indicates a potentially hazardous
situation which, if not avoided, MAY result in minor
or moderate injury and property damage. It may also
be used to alert against unsafe practices.
WARNING
Hydraulic Fluid escaping under pressure
can penetrate skin and do serious damage.
Immediate medical assistance must be
sought.
WARNING
Batteries produce explosive gases and
contain corrosive acid and supply levels of
electrical current high enough to cause
burns.
WARNING
Before releasing transport latches it is
important that all cutting units are fully raised.
1. Park the machine on level ground.
2. With the engine running at operating speed
raise the cutting units to their maximum
position by operating lift levers whilst seated
in the driving position.
3. Disengage drives, stop the engine and make
sure all moving parts are stationary. Apply
brakes and remove the starter key.
4.transport latches can now be released.
JACOBSEN FAIRWAY 305 Series CG2
SAFETY AND OPERATION & MAINTENANCE MANUAL
IMPORTANT: Transport speed is for highway use
only. Never select transport speed on grass
areas or uneven or unsurfaced roads or tracks.
The operating Instructions for the Cutting Units are
contained in a separate Publication .
Engine Exhaust, some of its constituents,
and certain vehicle components contain or
emit chemicals known to the state of
California to cause cancer and birth defects
or other reproductive harm.
DO NOT USE ON SLOPES GREATER THAN
15°
WARNING
California Proposition 65
WARNING
en-7