Transport; Securing The Charger For Transport; Basic Wall Mount; Attaching The Control Unit To The Basic Wall Mount - Porsche Mobile Charger Connect Manual De Instrucciones

Transport

Transport
DE
EN
WARNING
FR
An unsecured, incorrectly secured or incorrectly
positioned charger can slip out of place and endanger
IT
the vehicle occupants during braking, acceleration,
ES direction changes or in accidents.
e Never transport the charger unsecured.
PT
e Always transport the charger in the luggage
NL
compartment, never in the passenger
compartment (e.g. on or in front of the seats).
SV

Securing the charger for transport

FI
The charger is supplied with or without a transport
DA
case, depending on vehicle type.
e If a transport case is supplied: Always stow and
NO
transport the charger in the case. Attach the case
EL
to the front and rear tie-down rings with hooks.
CZ For information on the tie-down rings in the
luggage compartment:
f refer to the Driver's Manual.
HU
e If a transport case is not supplied: Stow the
PL
charger in the rear luggage compartment for
HR
transporting it.
e Depending on vehicle type, stow the charger in
SR
such a way that it does not endanger any
SK
occupants in dangerous situations.
SL
ET
LT
LV
RO
BG
MK
36

Basic Wall Mount

Unsecured load
Attaching the control unit to
the basic wall mount
Fig. 10: Attaching the control unit
1. Route the vehicle cable through the lower
opening of the basic wall mount, place the
bottom of the control unit on the locking tab and
engage towards the rear.
2. Guide the supply cable through the upper
opening in the basic wall mount and lock the
circlip by pushing it to the left.
3. Insert the vehicle plug into the connector
fastener.

Charging Dock

Fig. 11: Charging Dock

Opening the charging dock

e Press the door of the charging dock in direction of
arrow.
The door opens automatically.

Closing the charging dock

e Close the door of the charging dock and press in
direction of arrow.

Locking the charging dock

e Turn the lock to position A.

Unlocking the charging dock

e Press the lock to position B.