WAGNER F230 Manual Del Usuario página 5

Use the following procedure to mount the paint hopper and attach
the return tube on a hopper unit.
1. Align the bottom of the paint hopper with the threaded inlet
valve on the paint pump block.
2. Turn the paint hopper clockwise to thread it onto the inlet
the inlet valve.
i
3. Place the filter screen into the bottom of the paint hopper and
snap it in position.
5. Screw the return tube fitting found in
the literature set into the return tube
port on the side of the pump.
i
6. Place the straight end of the return
tube into the return tube fitting.
onto the return tube fitting and tighten until the return tube is
secure.
8. Place the hook end of the return tube into the hole in the
paint hopper cover.
Paint Hopper Cover
Use the following procedure to attach the suction set to a suction set
unit.
1. Align the nut on the suction set with the threaded inlet valve
on the paint pump block.
2. Turn the nut clockwise to thread it onto the inlet valve.
i
3. Screw the return tube fitting found in the literature set into
the return tube port on the side of the pump.
i
4. Place the straight end of the return tube into the return tube
fitting.
5. Slide the return tube clamp onto the return tube fitting and
tighten until the return tube is secure.
© Wagner. All rights reserved.
Return Tube Fitting
Attention
Return Tube
Attention
Return Tube
Follow this procedure after the unit is assembled and before any
operation which involves the spray gun such as cleaning and
maintenance or changing tips or accessories.
5
1. Turn the pressure control knob counterclockwise to its lowest
pressure setting.
Pressure Control Knob
PRIME/SPRAY Valve
2. Remove the paint hopper cover and fill the paint hopper with
material or place the suction set into a bucket of material.
5. Turn the pressure control knob clockwise to between half and
1. Turn the pressure
control knob
Pressure Control
counterclockwise to
its lowest setting.
valve to PRIME.
3. Trigger the gun to
remove any pressure
that may still be in the
hose.
rotating the trigger
lock forward until it
stops.
Trigger locked
(gun will not spray)
Knob
PRIME/SPRAY
Valve
GB