Idiomas disponibles
Idiomas disponibles
Always place sprayer outside of structure in fresh air. Keep all
running or hot engine. Hot surface can ignite spilled fuel. Always
attach ground wire from pump to a grounded object. Refer to engine
methylene chloride and 1,1,1 - trichloroethane. They are not
instructions supplied with the mask to be sure it will provide
the necessary protection.
equipment.
governing ventilation, fire prevention, and operation.
holding the spray gun. The recoil force of the spray gun is
particularly powerful when the tip has been removed and
a high pressure has been set on the airless pump. When
cleaning without a spray tip, set the pressure control knob to
the lowest pressure.
and liabilities when using parts that do not meet the minimum
specifications and safety devices of the pump manufacturer.
couplings. Immediately replace the hose if any of these
another earthed high-pressure hose.
safe handling of paint and solvents.
children or anyone not familiar with the operation of airless
equipment.
© Wagner. All rights reserved.
Electric models must be earthed. In the event of an electrical short
circuit, earthing reduces the risk of electric shock by providing an
escape wire for the electric current. This product is equipped with a
cord having an earthing wire with an appropriate earthing plug. The
plug must be plugged into an outlet that is properly installed and
earthed in accordance with all local codes and ordinances.
instructions are not completely understood, or if you are in doubt as
to whether the product is properly earthed. Do not modify the plug
provided. If the plug will not fit the outlet, have the proper outlet
installed by a qualified electrician.
This high performance airless sprayer is a precision power tool used
for spraying many types of materials. Read and follow this instruction
manual carefully for proper operating instructions, maintenance and
safety information.
PRIME/SPRAY
Valve
Return Tube
Suction Tube
Weight:
Hopper unit ..........................................
Suction set unit ....................................
......................................................
Power source .............................................Electric motor, totally enclosed,
........................................................
Spraying pressure ...................................
.................................................Sprays a variety of oil-based and
3
Pressure Control
Knob
Motor ON/OFF
Switch
minute
fan cooled
GB
