Idiomas disponibles
Idiomas disponibles
........................................................................... 2
........................................................................ 3
................................................................................... 3
........................................................................... 4
............................................................................................. 4
Preparing to Prime .......................................................................................4
Mounting the Paint Hopper......................................................................5
Attaching the Suction Set .........................................................................5
Priming the Pump .......................................................................................5
.......................................................................................... 6
............................................................................................ 7
.................................................................................... 8
............................................................................ 10
................................................................................... 82
Main Assembly — Hopper Unit .............................................................82
Main Assembly — Suction Set Unit .....................................................84
Diaphragm Pump .......................................................................................86
Pump Head Assembly ...............................................................................90
Hopper Assembly .......................................................................................92
This manual contains information that must be read and understood
before using the equipment. When you come to an area that has one
of the following symbols, pay particular attention and make certain to
heed the safeguard.
Attention
i
Attention
automatically resets.
working on the equipment.
the motor from the power supply, relieve pressure by turning
the priming valve to PRIME.
provide protection against an injection injury.
GB
.............................................................. 5
release all pressure before servicing, cleaning the tip guard,
changing tips, or leaving unattended. Pressure will not be
or pressure bleed valve must be turned to their appropriate
positions to relieve system pressure. Refer to the PRESSURE
provides some protection but is mainly a warning device.
system.
abuse. A leak can inject material into the skin. Inspect the
hose before each use.
trigger guard in place.
operating pressure range of the sprayer. This includes spray
keep the air within the spray area free from accumulation of
sparks from connecting and disconnecting power cords or
working light switches.
Flammable vapors are often heavier than air. Floor area must
that emit sparks and can ignite vapors.
be properly grounded to prevent static sparks.
must be earthed through hose connections.
pressure, with spray tip removed. Hold gun firmly against side
of container to ground container and prevent static sparks.
instructions.
green earthing wire to connect the unit to a water pipe, steel
beam, or other electrically earthed surface.
enough vapors to ignite.
spray area. Do not use plastic drop cloths when spraying
2
© Wagner. All rights reserved.
