Gear Box Oil Replacement; Tyres Inflation; Tyre Pressure; Quickfit - NIBBI KAM 4 Uso Y Mantenimiento

GEAR BOX OIL REPLACEMENT

(Fig. 22)
Oil must be replaced when hot, by un-
screwing fillcap A and fillcap B equipped
with an oil dipstick. When oil is completely
drained, replace cap A and fill up with new
oil through hole B (1,5 Kg).
Check level by using dipstick on cap B. This
operation is to be done with motor cultivator
in horizontal position.

TYRE PRESSURE

Often check that tyre pressure be within the
limits of 1-1,2 bar (Kg/cm
QUICKFIT
(Fig. 23)
CONNECTION WITH MOTORCULTIVATOR:
Assemble the Quickfit onto the motor culti-
vator and fix it, with the appropriate nuts (1),
to the flange's threaded holes.
IMPLEMENTS USE: With engine at standstill
and machine placed horizontally, pull lever
(2) and lock it in open position. Once the
implement is connected, turn lever until it
clicks back into locking position.
ATTENTION - To avoid imple-
ments seizing it is necessary to
grease the Quickfit daily.
).
2
48