Safety Devices; Engine Stop; Gear Hook; Pto Hindrance Device - NIBBI KAM 4 Uso Y Mantenimiento

SAFETY DEVICES

The motor cultivator is equipped with different
safety devices which are:
1) MOTORSTOP
The working position of the Motorstop control
lever 1 is shown in Fig. 12.
If, for any reason, the handlebars are released
from the operator's hands, lever 1 will auto-
matically adopt the position shown
in Fig. 13 and thus stop the engine.
2) CLUTCH HOOK
The inserted clutch hook C (Fig. 14) pre-
vents any power transmission with gears
engaged.
3) POWER TAKE-OFF HINDRANCE
DEVICE
This very important device avoids the simulta-
neous engagement of PTO and reverse gear,
when tiller is mounted. There-
fore, to use the reverse gear, it is first neces-
sary to disengage the PTO
The hindrance device is automatically en-
gaged or disengaged when the forward and
reverse gear control lever is rotated.
4) 4 REVERSE GEAR HINDRANCE DEVI-
th
CE IN FRONT IMPLEMENTS POSITION
This fixed device is placed on top of the
column and makes the 4
gagement impossible.
ELECTRIC START (Fig. 15)
(upon request at time of purchase order)
1) Battery 1 2V - 24 Ah
2) Starter switch
3) Battery recharge warning light
4) Headlight unipolar plug
ENGINE ELECTRIC
In order to start the engine, proceed as
follows:
1) After having made sure that the speed
control lever and the PTO control lever are
in idle position and the clutch hook C (Fig.
12) engaged, insert the ignition key in the
start switch and turn into position 1 (see
reverse gear en-
th
START (Fig. 16)
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
45