Tripp-Lite SRCOOL60KCW El Manual Del Propietario página 46

7. Precision Cooling Dashboard Software
• TCP/ IP Settings for IPv4
1) DHCP Client: Enable/Disable DHCP. If enabled, the DHCP server automatically assigns an IP address to the SRCOOL60KCW.
2) IP Address: The IP address in dotted format.
3) Subnet Mask: The Subnet Mask for the network.
4) Gateway IP: The IP address for the network gateway in dotted format.
5) DNS IP: The IP address Domain Name Server in dotted format.
6) Search Domain: If the domain entered cannot be found, the system defaults to the Host Name.
• TCP/ IP Settings for IPv6
1) DHCP Client: Enable/Disable DHCP. If enabled, the DHCP server automatically assigns an IP address to the SRCOOL60KCW.
2) IP Address: The IPv6 address.
3) Prefix Length: The prefix length for the IPv6 address.
4) Gateway V6IP: The IP address for the IPv6 network gateway.
5) DNS V6IP: The IP address for the IPv6 domain name server.
• System
1) Host Name: The SNMP IPv6 Host Name on the network.
2) System Contact: System contact information.
3) System Location: System location information.
• Link
1) Auto-Negotiation: Enable/Disable automatic transfer rate (10/100Mbps) negotiation.
2) Speed: If the Auto-Negotiation is disabled, the transfer rate can be specified.
3) Duplex: If the Auto-Negotiation is disabled, the duplex mode can be specified.
• Web
1) HTTP: Enable/ disable HTTP connection.
2) HTTPS: Enable/ disable HTTPS connection.
3) HTTP Port: Assign an HTTP port number (default: 80).
4) HTTPS Port: Assign an HTTPS port number (default: 443).
5) Web Refresh Period: Enter a time period (in seconds).
46