Control Panel Operation; Status Screen And Main Menu; Power On/Off - Tripp-Lite SRCOOL60KCW El Manual Del Propietario

5. Operation

5.2 Control Panel Operation

No. Button
Returns to previous screen or cancels current operation.
1 ESC
2 Enters your selected item or confirms your selection or setting.
3 Goes back to previous screen, moves up or increases number.
4 Goes to next screen, moves down or decreases number.
After entering a screen, if its options exceed four, you may press
within the current selected page. Press
To enter or change values (such as password or temperature), use
store and submit. Press ESC to cancel the current operation.
If the unit becomes idle, the LCD and backlight will automatically turn off.
Note: The default language of the control panel is English. The path for setting your preferred language is Main Menu

5.3 Status Screen and Main Menu

The LCD and backlight will turn off when the unit is idle. Press
screen, the air supply status and the air flow percentage of the fans is shown. The air flow percentage represents the fan speed and the
more solid status bars shown indicate higher fan speed.
In the status screen, press
If an alarm occurs, press
y y

Power ON/OFF

Start up the cooling unit (automatic mode) or enter standby mode.
y y
Status
View the system, run hours and event log.
y y
Setting (User's password required)
Adjust the set point, local setting, controller setting and alarm setting.
y y
Administrator (Admin password required)
Enter the manual mode to view the firmware version and system setting.
System Mode
ON
to move the highlighted zone.
24.0 C
to enter the Main Menu shown below.
and you will see a screen display the description of the alarm.
Power ON/OFF
Standby
Description
to advance the page. Press
. Press to skip to next field. In the last field, press
Supply Air
50%RH
Flow
to wake up the backlight and display the status screen. On the status
Status
Setting
A d ministrator
27
for a highlighted zone to appear
g g g
Setting Local Setting Language.
to