Configuring Via Telnet - Tripp-Lite SRCOOL60KCW El Manual Del Propietario

6. Network Configuration
Step 6: Click Configuration to modify network settings.

6.1.3 Configuring via Telnet

Step 1: Use a Cat5 network cable to connect the network port to the network.
Step 2: Connect the workstation (Windows or Linux) to the LAN that the SRCOOL60KCW is connected to.
Step 3: For Windows, launch DOS prompt mode (Start g Run g key in cmd and press Enter). For Linux, launch Shell.
Step 4: Enter telnet <<IP Address>> to initiate telnet connection with the unit.
Step 5: When connection is established, enter an Administrator's account and password (default: admin/password, case sensitive).
The Main Menu will appear on the screen. Refer to 6.1.5 Configuring via Text Mode for more information.
Notes:
• The unit will terminate any idle connections after 60 seconds.
• For complete configuration, refer to 7. Precision Cooling Dashboard Software.
38