Tripp-Lite SRCOOL60KCW El Manual Del Propietario página 12

3. Installation
3
Use a screwdriver to remove the two screws and ground wire from the rear door
to remove.
Note: Place the front and rear doors that have been removed in a safe place to avoid any equipment damage or personal injury.
4
Use a screwdriver to loosen the screw below the fastener and lock it on the adjacent cabinet.
5
Secure the front and rear fasteners (8 total) to the adjacent cabinet.
6
After securing the fasteners, reinstall the front and rear doors.
1
1
(Figure 3-5: Remove the rear door)
(Cooling unit)
(Figure 3-6: Join the cooling unit and the adjacent cabinet together)
12
1 , lean the rear door towards you and lift it up
(Adjacent cabinet)
2
2