View System Status - Tripp-Lite SRCOOL60KCW El Manual Del Propietario

5. Operation
y y
Sensor Alarm
Path: Main Menu g Setting g Set Alarm g Sensor Alarm
Return Sensor
Supply Sensor
Remote Sensor 1
Remote Sensor 2
Enables/disables the alarm for Return Sensor, Supply Sensor, Remote Sensor 1-4, Water In/ Out Sensor, Flow Meter and Leak
SEN (leakage detector sensitivity).
y y
Actuator Alarm
Path: Main Menu g Setting g Set Alarm g Actuator
Ball Valve Error
Fan 1 Abnormal
Fan 2 Abnormal
Fan 3 Abnormal
Enables/disables the alarm for ball valve and fan 1~8.
y y
Out-of-Range Alarm
Path: Main Menu g Setting g Set Alarm g Out Of Range

5.7.5 View System Status

Path: Main Menu g Status g System
12/04/30
10:10:00
Capacity :25.2KW
Supply Air T :25 C
Supply Air RH :50%
Inquires about system-related information, including cooling capacity, supply air temperature and humidity, return air temperature
and humidity, remote 1 temperature and humidity, remote 2 temperature, remote 3 temperature, remote 4 temperature,
chilled water inlet/outlet temperature, chilled water flow rate, ball valve opening, ball valve command (set the ball-valve
opening), fan command (set the fan speed), heater command, humidifier command, fan 1~8 failed, E.P.O. active, fire active,
smoke active, filter failed, drain pan full, leak active (enable the leakage detection) and wire leak open (water leakage detector has
open/short issues).
: Remote Sensor 3
:
Remote Sensor 4
:
:
: Fan 4 Abnormal
:
Fan 5 Abnormal
: Fan 6 Abnormal
:
Fan 7 Abnormal
Return Air
T High: ---- C
Return Air
T Low: ---- C
Return Air T
Return Air RH
Remote Ch1 T
Remote Ch1 RH
:
:
:
:
:
:
Return Air
RH High: ----%
Return Air
RH Low: ----%
:35 C
:35%
:---- C
:----%
32
Water In Sensor :
:
Water Out Sensor
Flow Meter :
:
Leak SEN.
High
Fan 8 Abnormal :
Remote Ch2 T :---- C
Remote Ch3 T :---- C
Remote Ch4 T :---- C
Air Volume :----CMM