Configuring With Tlnet (System) - Tripp-Lite SRCOOL60KCW El Manual Del Propietario

6. Network Configuration
6.1.2 Configuring with TLNET (System) Configurator
The downloadable TLNET Configurator utility (compatible with Windows 2000/2003/2008/XP/Vista/7) enables easy configuration and
®
firmware upgrade of the system's SNMP configuration. Follow the instructions below:
Step 1: Use a Cat5 cable to connect the network port to the network.
Step 2: Ensure the two DIP switches are set to the OFF position (Normal Mode) to enable network communication and that the
workstation and the SRCOOL60KCW are on the same LAN.
Step 3: Once downloaded, launch the Configurator.
Step 4: Click Discover to search all available SNMP devices on the LAN. A list of devices will be shown.
Notes:
• To search for SNMP devices in a different domain, change the Subnet and IPv4/IPv6 Prefix Length and click Discover.
• If the unit cannot be found, verify that UDP port 3456 on the workstation is open.
Step 5: Select the SRCOOL60KCW to be modified from the Device List. Click Modify and enter the Administrator's account and
password (default: admin/password, case sensitive).
37