View / Reset Running Hours; View / Clear Event Log; Changing System Type - Tripp-Lite SRCOOL60KCW El Manual Del Propietario

5. Operation

5.7.6 View / Reset Running Hours

Path: Main Menu g Status g Run Hours
System :
2000h
Filter :
720h
Fan 1 :
8000h
Fan 2 :
8000h
Inquires about the system and unit components for assistance in evaluating the component status and determining a repair or
replacement time.

5.7.7 View / Clear Event Log

Path: Main Menu g Status g Event Log
In this screen, the number of current events/total events is displayed. A maximum of 3,000 events can be recorded. Press
events. The events are numbered according to the occurrence time. The older the event, the smaller its number is. The digit in <> is the
event code. If the records exceed 3,000, older events will be overwritten.
An admin password is needed to clear any event log. The path is: Main Menu g Administrator g System g Clear Log.
Note: The event log is important information for evaluating the system status and also a reference for service personnel to perform maintenance.
Therefore, do not clear the event log without authorization.
5.7.8 Change of System Type
Path: Main Menu g Administrator g System g Type
Follows your data center's cold/hot aisle configurations to set up the system type: OPEN or CLOSED.
:
Fan 3 8000h
:
Fan 4 8000h
:
Fan 5 8000h
:
Fan 6 8000h
Number :66/66
12/01/01
10:10:00
<003>Exit Manual
Mode
Installation : OFF
Type : OPEN
Set Admin PW : ----
Clear Log
33
:
Fan 7 8000h
:
Fan 8 8000h
:
Ball Valve 8000h
to switch