ESAB ESP-150 Manual De Instrucciones página 21

SecTION 3
NOTe: If cNc does not have a nor-
mally closed emergency stop switch,
a jumper must be installed between
Tb1-16 and Tb1-20.
6 . control Mode Selection for Operation with Remote Plumbing box
The ESP-150 is supplied from the factory with Plug P45 connected to the
J4 (MAN) receptacle (torch gases and torch connected directly to the
ESP-150 power source) . If the unit is to be used with a remote plumbing
box, move P45 to the J5 (MECH) receptacle .
Factory supplied for standard
operation - P45 to J4 (MAN)
figure 8. Manual vs. Mechanized Operation
Receptacle Pin configuration for cNc connection
21
P45 moved to the J5 (MECH)
J1
CONNECTOR
Note: J1 Mating Plug and clamp
USER SUPPLIED CABLE
14-PIN Straight
Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 636667
Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6271127
figure 9. J1 Remote control
INSTallaTION
position to allow use of
remote plumbing box