ESAB ESP-150 Manual De Instrucciones página 19

SecTION 3
ELECTRIC SHOCK CAN KILL! Precau-
tionary measures should be taken to
provide maximum protection against
electric shock. Be sure that all power is
off by opening the line (wall) disconnect
switch by unplugging the power cord to
the unit or use proper lock out safety
procedures when making connections
inside of the power source.
2. 50 Hz Models - As shipped from the factory, the ESP-150 is configured
for the highest connectable voltage. If using other input voltages, the
links on the terminal board (TB) inside the unit must be repositioned
for the appropriate input voltage. See Figures 5a & 5b for input volt-
age configurations. To gain access to the terminal board, open the
access panel on the left side.
Fig. 5a
Input Terminal Board
380/415 Vac Models
380-400 Vac Configuration
Fig. 5b
Input Terminal Board
380/415 Vac Models
415 Vac Configuration
(Factory Supplied)
19
INSTallaTION