4. Preparation
USING ONLY WIDE BLADES
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
Wearing PPE (Personal Protective
Equipment) is mandatory
If you want to use wide blades only, proceed as follows:
Mount 3 wide blades on the right feeding drum and 3 on the left, observing
the right and left sides (see illustrations below):
Carriage bolt 3/8" x 1" (18 pt)
Lock Nut 3/8" (18 pt).
60
Observe in the figures above the
mounting side of the blades on the
feeding drums.
Instructions Manual