Tension Release Button - Texi Pierrot Manual De Operación

TEXI Pierrot operation manual

Tension release button

This serger is equipped with a thread tension release button. When threading be sure to:
How to thread the upper looper
1) Depress the tension release button directly to the right of the ten-
sion adjustment wheel.
2) Pass the thread trough the tension disc which is in the channel
next to tension adjustment dial.
3) Release the button.
1. Thread tension release button
2. Thread tension dial
3. Depress tension release button
1. Pull out the thread from the thread spool.
2. Correctly thread the thread guide (1).
3. Lead the thread into the groove and let
4. Thread the looper area of the machine
5. Thread the hole in the upper looper from
NOTE
If the upper looper thread breaks during sewing.
This may be cused be the lower looper thread
getting caught on the upper looper. If this
happens, lower the upper looper by turning
the hand wheel, remove the lower looper thread
from the upper looper and re-thread the upper
looper from at least the tension disk.
111
Thread the guide hole of the thread mast
from back to front.
the thread pass the tension disc of the
tension adjustment dial (2).
following the green color coded thread
guides (3) to (5).
front to back (6).