baltur BTL 0 Manual De Instrucciones página 32

MAINTENANCE
Most components can be inspected by removing the hood. To inspect the head you must disassemble the component-carrying plate which
can be hung on hung on the burner body in two different positions to make work as practical as possible. The motor, transformer and solenoid
valve are connected via a connector while the photo-resistor is push-locked into place.
E
N
G
L
I
S
H
1) Undo the lid screw to gain access to the interior
of the burner.
2) Undo the 4 screws of the plate, as indicated, in
order to access nozzle, electrodes and pre-heater
(if fitted).
3) The plate must be hung up as illustrated in fig. C.
28 / 64
0006080748_20072
N° 0002933250
Rev. 26/09/00