Tabla de contenido
Idiomas disponibles
Idiomas disponibles
MANUAL DE INSTRUCCIONES CODIGO 80282 REV D
P8
121ºC 05・PRESS
1.5bar
080ºC
START
PROG/
PROGRAMS
PROG/P0
110ºC
・1.5BAR
PROG/P1
090ºC
・1.2BAR
PROG/
SELECT
P1
090ºC 05・PRESS
1.2bar
080ºC
START
P8
121ºC 05・PRESS
1.5bar
080ºC
START
PROG/
PROGRAMS
PROG/P0
110ºC
・1.5BAR
PROG/P1
090ºC
・1.2BAR
PROG/
SELECT
PROG/
MODIFY
P1
090ºC 05・PULSE
1.2bar
080ºC
START
J
.P. SELECTA s.a.u.
9.1 Cycle selection.
Press the knob, the «PROGRAMS» screen appears.
Press again to enter the cycles selection.
Turn the knob until you find the desired cycle.
10
080ºC
Once found, press the knob.
5
080ºC
«SELECT» appears, press again to confirm.
The confirmation screen «SELECTED» appears for a few seconds.
Finally, the default screen with the selected program appears.
Press the START/STOP button, the LED will light and the equipment will start up.
START
STOP
9.2 Program modification
This menu allows you to modify the cycle parameters. All cycles are modifiable
(see 5.3 for the limits of each cycle parameter).
Through the «PROGRAMS» menu, press the knob to access the different pro-
grams.
We can choose the program number that best suits our needs and edit it, just
by turning the knob.
10
080ºC
By pressing the knob, «SELECT» will appear.
5
080ºC
Turn the knob so that «MODIFY» appears, press the button again and the pro-
gram you want to modify will appear on screen.
To modify a parameter: select by turning the knob, confirm by pressing, modify
by turning and again confirm by pressing.
Once modified, press the button and «SELECT» will appear. Again press to confirm
and «SELECTED» will appear for a few seconds.
Finally, the default screen with the selected program will appear.
Press the START/STOP button, the LED will light and the equipment will start up.
START
STOP
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: [email protected] - website: http://www.jpselecta.es
DIC/2018 (Sujetas a modificaciones sin previo aviso)
Pag.: 38
Tel 34 937 700 877 Fax 34 937 702 362
Tabla de contenido
