INSTRUCTION MANUAL CODE 80282 REV D
J
.P. SELECTA s.a.u.
DEC/2018
12 Safety devices
The autoclave is equipped with the following safety devices:
12.1 Safety pressure: set to 2.35 bar
Cut the electric power of steam generator (or electrical resistance) to stop steam
production when an abnormal overpressure in the chamber occurs.
12.2 Safety valve: set to 2.5 bar
In case the chamber pressure exceeds the 2.5bar, this valve is automatically
opened to release the vapour into the inner chamber and, consequently, depres-
surizing the chamber.
In case the safety valve triggers, you must stop the autoclave and call Customer
Service.
12.3 Safety thermostat: no adjustability
When an abnormal temperature rises or a considerable fall of water level (with
consequent steam generator overtemperature) occurs, safety thermostat (14)
comes into operation by stopping heating.
This thermostat cannot be reset, you must stop the autoclave and call Customer
Service.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
(It can be modified without notice)
Tel 34 937 700 877 Fax 34 937 702 362
Page: 47