Product Component Check - Nice Ten TNKCE Instrucciones Y Advertencias Para El Instalador

Chapter 8 "Technical specifications" also provides an estimate of "durability" i.e. average product lifetime. The value is strongly influenced by
the stress factors involved in the manoeuvre, i.e. all factors that contribute to wear. To make this estimate, the total of all the gravity ratings
in Table 5 must be calculated, for subsequent verification of the estimated feasibility in the graph. For example, TNKCE on a door of 130 Kg
, which requires a force of 150Nm to move the leaf, equipped with photocells and no other factors of fatigue, obtains a gravity rating of 60%
(30+20+10). The estimated durability on the graph is therefore 18,000 cycles.
Note that the estimate of durability is conducted on the basis of design calculations and results of tests performed on prototypes; as this is
an estimate it does not constitute any form of guarantee on the effective lifetime of the product.
Table 5: Estimate of durability in relation to the manoeuvre gravity rating
Gravity rating %
Leaf weight Kg
Up to 70
70 ÷ 150
150 ÷ 200
Oltre 200
Force to move leaf N
Up to 100
100 ÷ 180
180 ÷ 220
220 ÷ 280
Other factors of fatigue
(to be considered if the probability of occurrence exceeds 10%)
Ambient temperature over 40°C or
below 0°C or humidity over 80%
Presence of dust or sand
Presence of salt water
Interruption of manoeuvre by Photo
Interruption of manoeuvre by Stop
High speed
Total gravity rating %:

2.2) Product component check

• Check the condition of the packaging;
• unpack the product and ensure the presence of all items listed below
(Figure 2):
2
TNKCE TN2030
+
TN2030 TN2020
20 10
30 20
40 30
60 50
10 5
20 15
40 30
- 50
10 10
15 15
20 20
10 10
20 20
15 15
50000
45000
40000
35000
30000
25000
20000
15000
10000
5000
0
0 10 20 30 40
Gravity rating %
N° pieces TNKCE
A
1 TEN Gearmotor
B
4 M6 nuts
C 2 M8 nuts
D 2 M10 nuts
E 1 Release rod
F 2 Arm support bracket
G 2 Adaptor bushing
H
2 Upper connection bracket
I
2 M10x30 screw
L
2 M8x110 screws
M
4 Ø8 washers
N
4 Self-tapping screws 5.3x19
O 4 Threaded stud bolts M6x14
P 2 Telescopic tube
Q 2 Straight arm with welded bushing
R 1 Remote control
S
1 Flashing light
T
2 Selector
U
1 Warning sign table
N° pieces TN2030-TN2020
A 1 TEN Gearmotor
B 2 M6 nuts
C 2 M8 nuts
E 1 Release rod
L 2 M8x110 screws
M
2 Ø8 washers
O
2 Threaded stud bolts M6x14
50 60 70 80 90 100
GB
5