Rear Wheel Removal - Honda XRE 190 Manual Del Propietário

58
 Rear wheel
Removal
1. Support your motorcycle securely and raise the
rear wheel off the ground using a maintenance
stand or a hoist.
2. Loosen the lock nuts and drive chain adjusting nuts
on both sides of the swingarm.
3. Remove the rear axle nut.
4. Remove the drive chain from the driven sprocket
by pushing the rear wheel forward.
5. Remove the rear axle shaft, axle washer and drive
chain adjusters.
6. Remove the brake caliper bracket, rear wheel and
side collars
Support the brake caliper assembly so that it
doesn't hang from the brake hose. Do not twist
the brake hose.
Avoid getting grease, oil, or dirt on the disc to
pad surfaces.
Do not push the brake pedal while the brake
caliper is removed.
4
1. Rear axle nut
2. Rear axle washer
3. Drive chain adjusting nut
4. Lock nut
1
4
1. Drive chain adjusting nut
2. Drive chain
3. Lock nut
4. Rear axle shaft
1
2
3
2
3
XRE 190