Honda XRE 190 Manual Del Propietário página 149

64
XRE 190 without Abs
1
3
4
1. Remove the left side cover (page 39).
2. Pull off the fuse boxes from the tabs and open the
fuse box covers.
3. Pull out the fuses one by one to check for a blown
fuse. Always replace a blown fuse with a spare
fuse of the same rating.
4. Close the fuse box covers.
5. Install the left side cover
 Main Fuse
1. Tabs
2
2. Fuse
boxes
3. Fuse box
covers
4. Spare fuse
1. Remove the left side cover (page 39).
2. Pull off the starter magnetic switch from the tabs.
3. Disconnect the wire connector of the starter
4. Pull the main fuse out and check for a blown fuse.
5. Install the parts in the reverse order of removal.
1
3
4
5
magnetic switch.
Always replace a blown fuse with a spare fuse of
the same rating.
Spare main fuse is provided in the starter mag-
netic switch.
n
otice
If a fuse fails repeatedly, you likely have an electrical
problem. Have your motorcycle inspected by your
dealer.
XRE 190
1. Tabs
2
2. Starter
magnetic
switch
3. Wire connector
4. Main fuse
5. Spare main
fuse