Wheels - Honda XRE 190 Manual Del Propietário

XRE 190
 checking the drive chain wear
If the drive chain slack is excessive when the rear axle
is moved to the furthest limit of adjustment, the drive
chain is worn and must be replaced.
chain: dId428HX
If necessary have the drive chain replaced by your
dealer.
checking the drive chain slider
Check the condition of the drive chain slider.
The drive chain slider will need to be replaced if the
chain slider is worn to the wear limit point.
If necessary have the drive chain slider replaced by
your dealer.
1
1. Wear limit point
2. Drive chain
slider
2

wheels

wheels Rims & spokes
keeping the wheels true (round) and maintaining correct
spoke tension is critical to safe motorcycle operation.
Excessively loose spokes may result in instability at
high speeds and possible loss of control.
It is not necessary to remove the wheels to perform the
recommended service in the Maintenance Schedule.
However, information for wheel removal is provided
for emergency situations (page 55).
1. Inspect the wheel rims and spokes for damage.
2. Tighten any loose spokes.
3. Rotate the wheel slowly to see if it appears to
"wobble." If it does, the rim is out of round or not
"true." If the wobble is noticeable, see your dealer
for inspection.
1
2
49
1. Wheel rim
2. Spoke