Honda XRE 190 Manual Del Propietário página 142

XRE 190
4. Remove the front axle shaft, front wheel and side
collars.
Avoid getting grease, oil or dirt on the disc or
pad surfaces.
Do not pull the brake lever while the front wheel
is removed.
1
2
1. Right side collar
2. Front axle shaft
Installation
1. Attach the left and right side collars to the front
wheel.
2. Position the wheel between the fork legs and insert
the front axle shaft from the right side, through the
right fork leg and wheel hub.
n
otice
When installing the wheel, carefully fit the brake
disc between the pads to avoid scratching them.
3. Tighten the front axle nut.
torque: 44 N·m (4.5 kgf·m, 32 lbf·ft)
4. After installing the wheel, apply the brake lever
several times and then check if the wheel rotates
freely. Recheck the wheel if the brake drags or if
the wheel does not rotate freely.
If a torque wrench was not used for installation,
see your dealer as soon as possible to verify proper
assembly. Improper assembly may lead to loss of
braking capacity.
57