Ingersoll Rand R30 Manual De Instrucciones página 4

121714.07.04
EN
Period
When indicated by
controller
Daily
Monthly
Every 1000 hours
Every 2000 hours or
3 months
Every 4000 hours or
6 months
Every 6000 hours
Every 8000 hours or
annually
16000 hours
Inspect and replace coolant filter elements and separator elements more frequently in dirty operating environments .
Read the motor data plate(s) or call the motor manufacturer(s) to determine specific greasing requirements . For motors that require greasing,
grease them more frequently in harsh environments or higher ambient conditions .
EN-4
Table 3: Maintenance Chart (R37e - 160 kW)
Action Maintenance Item
Replace Air filter element
Replace Coolant filter element
Replace Separator element
Check Connections and hoses for leaks
Check Coolant level
Check Condensate drain operation
Check Controller for service indicators
Check Package pre-filter for blockage
Inspect Air-cooled sequential cooling system for blockage
Inspect Water-cooled sequential cooling system screens
Inspect Starter box power drive module (PDM) filter element
Analysis Water from water-cooled sequential cooling system
Analysis Food-grade Lubricant (Ultra FG)
Inspect Air filter element
Inspect Coolant filter element
Inspect Starter box power drive module (PDM) filter element
Replace Food-grade Filter Module
Analysis Shock pulse bearing
Analysis Premium Coolant (Ultra/Ultra EL)
Inspect Scavenge screen for blockage
Replace Air filter element
Replace Coolant filter element
Replace Starter box power drive module (PDM) filter element
Replace Package pre-filter element
Clean Air-cooled sequential cooling system
Inspect / Clean Water-cooled sequential cooling system
Calibrate Pressure transducers
Grease All motors (as required)
Replace Food-grade Lubricant (Ultra FG)
Replace Separator element (if using Food-grade Lubricant)
Inspect Air filter element
Inspect Coolant filter element
Replace Separator element
Replace No-loss condensate drain service module
Replace Premium Coolant (Ultra) [8000 hours or every 2 years]
Service Minimum pressure check valve (MPCV) service kit
Clean Drains with all their components (TIMED DRAINS ONLY)
Service Inlet valve service kit
Replace Coolant hoses
Replace Contact tips
Replace Extended-life Premium Coolant (Ultra EL) [16000 hours or every 3 years]
NOTICE
NOTICE
80447170 Rev C