Wake-Up Alarm; Time; Time Zone; Other Settings - SCUBAPRO UWATEC Galileo Luna Manual Del Usuario

2. Menus, settings and functions

2.7.1 Wake-up alarm

This menu allows you to set a wake-up
alarm. The time of the alarm is shown in the
format specified in the time menu (either in
aM/PM or 24 hour). When the alarm is set
to on, a bell symbol appears in the time
of day display.

2.7.2 Time

This menu allows you to set the time format,
time and date.
Pressing "SaVe" at the last setting starts
the clock at the set time and 0 seconds.
2.7.3 Time zone (UTC)
This menu allows you to easily change the
time when traveling to other time zones.
Instead of changing the actual time itself, in
this menu you can define a number of hours
to add to or to subtract from the currently
displayed time so as to get the correct time
at your travel destination.
32
The range of the UTC setting is between
13 hours and +13 hours in 15 minute
increments.
2.8

Other settings

2.8.1 Device information

This menu displays the device ID number
(id), the hardware version (HW), the
software version (SW), the battery level and
the ASIC version. Press eXit to exit this
submenu and return to the other settings
menu.
2.8.2 Gas integration (default:
40bar/600psi, normal, OFF)
In this menu you can set the tank reserve
used for the RBT calculation, you can set
the sensitivity of the workload calculation to
changes in breathing pattern and you can
choose to replace the oxygen bar graph