Tecno-gaz europa B pro Instrucciones De Uso página 53

WATER DISCHARGE PIPE
Use to drain the water used from the faucet on the front of the autoclave (Fig.A–pos.09) -
(par. 10.8)
Picture
Envelope standard
Code
BLACK PLASTIC SPACER PIN
Put the spacer in the autoclave's back panel (FIG.1–pos.00) It's necessary for guarantee
a good ventilation if you place the autoclave near a wall.
Picture
Envelope standard
Code
FITTING FOR REAR TAPS DISCHARGE
Tighten the loading faucet (Fig. A-pos.02) to use the osmosi system, or to empty the
loading tank, and tighten the drain faucet (Fig. A-pos.04) to empty the drain tank.
Picture
Envelope standard
Code
PIPE FOR DISCHARGE UTILITIES
1 - Clean water overflow hose: connect one end of the hose to the clean water overflow
hose fitting (Fig. A-pos.01), and the other in a water recovery container.
2 - Used water overflow hose: connect one end of the hose to the fitting (Fig. A–pos.03),
and the other to a used water recovery container.
Picture
Envelope standard
Code
Fig.9
1
DANA130
Fig.10
1
CPAP014
Fig.11
2
CPRG096
Fig.12
2
SXBA799
ENGLISH
11