PLASTITALIA I Plast 105 Manual Del Usuario página 19

• Connect the control box to the generator (or mains voltage);
• Press the switch on the ON position to start ECU
Power on/off switch in OFF
position
• After you have pressed the on / off button the display shows the following message
• In succession messages of start-up including prohibition of use in environments with explosive atmosphere.
• Pressing the < > buttons you can select the operations to be done:
proceed with the welding
displays memory data
system edit (see instructions in the USB memory drives)
provides information related to the control unit
fusion data export (see instructions in the USB memory drives)
go back to the switch on
Press OK button to confirm the choice. Press the C button to go back to the previous view.
PRESS START
WELD! 10,48
Pag. 19