PLASTITALIA I Plast 105 Manual Del Usuario página 11

3.5.2) Fusion process control
a) The operator shall check ECU and the complete fusion process, including the cooling phase of the joint.
b) In case of smoke and/or loss of melted polyethylene stop immediately the process by pressing the red STOP button.
c) Be aware that the fusion of any material involves a risk of fire ignition. Inquire about how to alert the fire department
and/or providing a device for extinguishing of fires.
3.5.3) Safety distances during the fusion process
a) Avoid body contact with fittings or cables during fusion process. Keep a minimum safety distance of 1 meter.
4) Identification plate
On the rear part of the ECU is placed the identification plate. Following image is a template:
Data are:
− type
− manufacturing year and month
−
largest welding diameter (Plastitalia fittings)
−
voltage and frequency input
− power max (W)
−
total weight
−
classification (conform to ISO 12176-2)
− serial number (bar-code and numerical code)
Pag. 11