Unit Specifications; Installation; Unpacking And Installation - DENTSPLY Triad 2000 Manual De Instrucciones

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

DIMENSIONS

Height: .................... 12-1/8 in. (30.8 cm)

Width: .................... 7 in. (17.8 cm)

Depth: .................... 10-3/4 in. (27.3 cm)

Power Cord: ............ 62 in. (157.5 cm)

WEIGHT

Domestic: .............. 10 lbs. (4.5Kg)

Export: .................. 15.5 lbs. (7.03 Kg)

UNPACKING AND INSTALLATION

DO NOT CONNECT POWER CORD TO

OUTLET AT THIS TIME.

1. Remove unit from shipping carton and place

in the desired operating location.

2. Open the processing chamber door and

remove packing material.

NOTE: Save shipping and packing mate-

rials. If service is required at any time on

your Triad 2000 unit, you are respon-

sible for its safe* shipment back to

DENTSPLY. This is best accomplished

if the original shipping carton and pack-

ing materials are used.

3. Connect the POWER cord to an appropriate

power source.

4. Turn the POWER switch ON. The cooling

fan should operate.

5. With the access door closed, set the TIMER

dial to 1 minute. Depress the CURE switch

to ON. The lamp should illuminate.

6. Depress the TABLE switch to ON. The table

should rotate.

*Supply OSHA information re: Bloodborne pathogens policy on

shipping possible contaminated equipment for service.