Grindex Primo Serie Manual De Instalación, Operación página 3

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
en - Original instructions
1 Introduction and Safety
1.1 Introduction
Purpose of this manual
The purpose of this manual is to provide necessary
information for:
• Installation
• Operation
• Maintenance
CAUTION:
Read this manual carefully before instal-
ling and using the product. Improper use
of the product can cause personal injury
and damage to property, and may void
the warranty.
NOTICE:
Save this manual for future reference, and keep it
readily available at the location of the unit.
1.2 EC DECLARATION OF CONFORMITY
Grindex AB, with headquarters in Gesällvägen 33,
174 87 Sundbyberg, Sweden, declares that product
Primo D4, Primo D8, Primo S4, Primo S8 fulfils the
relevant provisions of the following European direc-
tives:
• MACHINERY 2006/42/EC
• EMC 2004/108EC
• Low voltage 2006/95/EC
And the following technical standards:
• EN ISO 12100:2010
• EN 809, EN 60335-2-41, EN 60204–1, EN
60034, EN 61000
Managing Director
Magnus Ståhl
Sundbyberg, (September 5, 2014)
1.3 Safety terminology and symbols
About safety messages
It is extremely important that you read, understand,
and follow the safety messages and regulations
carefully before handling the product. They are pub-
lished to help prevent these hazards:
• Personal accidents and health problems
• Damage to the product
• Product malfunction
Hazard levels
Hazard level
DANGER:
WARNING:
2
Indication
A hazardous situation
which, if not avoided, will
result in death or serious
injury
A hazardous situation
which, if not avoided,
could result in death or
serious injury
Hazard level
CAUTION:
NOTICE:
Hazard categories
Hazard categories can either fall under hazard levels
or let specific symbols replace the ordinary hazard
level symbols.
Electrical hazards are indicated by the following spe-
cific symbol:
Electrical Hazard:
These are examples of other categories that can oc-
cur. They fall under the ordinary hazard levels and
may use complementing symbols:
• Crush hazard
• Cutting hazard
• Arc flash hazard
1.4 Safety
WARNING:
Operating, installing, or maintaining the
unit in any way that is not covered in this
manual could cause death, serious per-
sonal injury, or damage to the equip-
ment. This includes any modification to
the equipment or use of parts not provid-
ed by Grindex. If there is a question re-
garding the intended use of the equip-
ment, please contact a Grindex repre-
sentative before proceeding.
Inexperienced users
NOTICE:
This product is intended to be operated by qualified
personnel only.
Working in temporary installations
Certain industries, such as mining or construction,
have a dynamic nature and require temporary instal-
lation of equipment. Due to the rugged nature of
these applications, normal use of electrical equip-
ment causes wear and tear that can result in insula-
tion breaks, short-circuits, and exposed wires. To
maximize safety when using the unit in rugged appli-
cations, the following conditions must be met:
• If electrical cables must be located such that they
are at risk of being run over by heavy equipment,
Indication
A hazardous situation
which, if not avoided,
could result in minor or
moderate injury
• A potential situation
which, if not avoided,
could result in unde-
sirable conditions
• A practice not related
to personal injury
Tabla de contenido
loading

Tabla de contenido