Technical Characteristics - nicai systems FT210B Instrucciones Y Advertencias Para El Instalador

9) Technical characteristics

In order to improve its products, NICE S.p.a. reserves the right to modify the technical characteristics at any time without prior notice. In any case,
the manufacturer guarantees their functionality and fitness for the intended purposes. Note: all technical characteristics refer to a temperature of 20°C.
FT210B technical characteristics
Product Type
Adopted technology
Receiver power supply
Receiver absorbed power
Transmitter power supply
Transmitter battery life
(with JP3 on)
Device input range
Sensitive (Rs)
Type D presence sensor detection capacity
TX transmission angle
RX reception angle
Directional capacity
Useful range
Maximum range
(under optimum conditions)
Presence sensor response time
Sensitive edge response time
Failsafe category
Use in acid, saline or potentially explosive
atmosphere
Assembly
Protection class casing
Operating temperature
Dimensions
Weight
Device for the optical status transmission of a constant resistance sensitive
edge positioned on the moving part, comprising a battery powered infrared
transmitter (TX) that is positioned on the moving leaf, to which the sensitive
edge is connected, and a receiver (RX) positioned on the fixed part.
TX-RX direct optical interpolation with modulated and coded infrared beam
The device can only be connected to "BlueBus" networks from which it is
powered and sends the output signals.
0.5 Blue bus unit
3.6V with type C or AA lithium battery
Estimated at approx. 15 years with the type C battery, 7Ah capacity; ("resi-
dential" use: TX-RX distance up to 7m; with 20 manoeuvres per day of 90")
Estimated at approx. 5.5 years with the type C battery, 7Ah capacity; ("indu-
strial" use: TX-RX distance up to 15m; with 200 manoeuvres per day of 90")
Estimated at approx. 6 years with the type AA battery, 2Ah capacity; ("resi-
dential" use: TX-RX distance up to 7m; with 20 manoeuvres per day of 90")
Typical 8.2KΩ; +22%/-65% for the on status (ON)
ON limits: with Rs > 2.870 and Rs < 10.010.
OFF limits: with Rs < 2.590. or Rs > 11.060.
Opaque objects located on the optical axis between TX and RX, larger than
50 mm and moving slower than 1.6m/s
+/- 4° (value taken at 50% of the capacity)
+/- 3° (value taken at 50% of the capacity)
approx. 210° on the horizontal axis and 30° on the vertical axis
7m or 15m (with JP1 inserted on TX) for maximum TX-RX misalignment ± 2°
(the range may be further reduced in the presence of particularly intense
atmospheric conditions: fog, rain, snow, dust, etc.)
15m or 30m (with JP1 inserted on TX) for maximum TX-RX misalignment ± 2°
< 96ms (typical 65ms) with 1 pair of MOFB photocells connected together
with the FT210B
< 64ms (typical 50ms)
3 (according to the EN 954-1 standard)
No
RX: vertically wall mounted or on "MOCF" posts with "FA2" bracket
TX: directly on the gate with the supplied screws
IP44
-20 ÷55°C
46 x 128 h 45mm
Receiver: 135g. transmitter 165g with FTA1 or 140g with FTA2
14