Maintenance And Cleaning; Cleaning Products - Arneg Francoforte Serie Guía De Instalación Y Manejo

Spring units load
Manual blinds width (mm)
indicati ve chart
Recommended preload with sheet rolled up (no. of windings)
Spring max load with the sheet rolled completely (no. of wind-
ings)
Installati on pro-
cedure
motorised blind
(Fig.27)
i
The blind is adjusted by the manufacturer.

21. Maintenance and cleaning

DANGER! Live parts. Electrocuti on.
REMOVE THE ELECTRIC POWER SUPPLY BEFORE ANY OPERATION!
DO NOT wet, spray water or clean directly the electrical parts of the cabinet (fans, inte-
rior lighti ng, electrical cables etc.)
DO NOT touch the cabinet with wet or damp hands and feet
CAUTION! Cold surfaces. Injuries, burning. Glass breakage.
Wait for the glass parts to reach room temperature.
DO NOT use hot water on the cold glass surfaces.
Protect the hands with work gloves
i
The products will deteriorate due to germs and bacteria.
Compliance with Hygiene Standards and the cold chain is indispensable to guarantee the
protecti on of consumer health
The cleaning operati ons must include:
Step Name
1 Washing
Saniti zati on
2
3 Rinsing
4 Drying

21. 1 Cleaning products

Use - clean water at maximum temperature of 30°C
- soft cloth
(Fig.19)
- mild and neutral detergents
05060171 00 13-02-2018
Step
1 insert stopper F, turn it and lock it in housing D
2 insert the blind using pin G
3 insert the opposite stopper, repeat step 1
roughing, removal of approximately 97% of the dirt
cleaning+disinfecti on:
- cleansing: removal of visible dirt
- disinfecti on: removal of pathogenic micro-organisms that remain
aft er washing
Acti on
Descripti on
F r a n c o f o r t e
English
< 1250 > 1250
20-30 25-30
50 55
4 3