Control And Adjustment Of The Temperature; Cabinet Loading - Arneg Francoforte Serie Guía De Instalación Y Manejo

Before • consult the wiring diagrams annexed to the cabinet
• make sure that the rati ng plate data matches the characteristi cs of the electri-
connecti ng
• check that power supply voltage is the one reported on the rati ng plate
• remove all metallic objects worn: rings, watches, bracelets, earrings, etc.
• proceed with wiring
i
If the electrical supply is interrupted, the electrical equipment of the shop will not restart,
triggering the overload protecti on devices; modify the system to diff erenti ate the start-up of
the various devices.

16. Control and adjustment of the temperature

Cabinets with the cooling temperature is controlled by means of:
- digital solar-powered thermometer (Fig.12)
remote
- electronic controller (opti onal) (Fig.13)
i
If the thermostat is powered by batt eries:
- replace the discharged batt eries with similar ones
- do not dispose of batt eries in the environment
- consign the batt eries to authorized collecti on centres

17. Cabinet loading

max allowed capacity evenly distributed of tray: 800 kg/m
max allowed capacity evenly distributed of shelves: 300 kg/m
Max roof capacity: 45 kg/m
Remedy • arrange the products in order and evenly (Fig.14)
• leave a 30 mm clearance between the goods and the top shelf (Fig.16)
• introduce products already cooled at the required storage temperature
• load the cabinet so that the goods from a longer ti me is sold before the newly
• on bent shelves, always use retainers
What to avoid DO NOT obstruct/impede the fl ow of cooled air
DO NOT not place goods on cabinet's roof (Fig.18)
NEVER introduce heated products
DO NOT obstruct the inlet of cooled air with: goods, price tags, price holders,
decorati ons etc.
DO NOT climb on the furniture(Fig.15). Use a compliant ladder to reach the
loading points.
05060171 00 13-02-2018
cal system to which the cabinet must be att ached
DANGER! Live parts. Short circuit. Electrocuti on
Check that the att achments of the lighti ng systems (fl oors, roof, ceil-
ing) are properly inserted and locked into their housings to avoid
disconnecti ons during cleaning and maintenance operati ons, that may
cause harmful electric shocks.
i
The controller is set in the factory during testi ng.
To change the set parameters, contact the manufacturer.
(Fig.14).
2
received goods (stock rotati on)
F r a n c o f o r t e
(Fig.14).
2
(Fig.14).
2
English
4 1