Sirona Dental USB-Box Instrucciones De Uso E Instalación página 62

4 installation
B
A
20
Connecting the sensor
Connect the sensor by plugging the connector into the
socket on the USB – Box. The red mark A must point
toward the marking line B.
ATTENTION
The sensor cable must not be bent, twisted or subjected
to any other form of mechanical stress.
Do not unplug the sensor by pulling on the cable.
You should occasionally perform a visual check of the
sensor cable.
Sirona Dental Systems GmbH
59 15 702 D 3334
D 3334.201.02.13.02