Front Of The Device - COOK Medical K-MINC-1000 Manual De Instrucciones

K-MINC-1000 Instructions for Use

3.3 Front of the device

11
3
2
1 4
6
Symbol Description
1. Standby touch-pad Toggles the device between Active and Standby State.
Power indicator Green = Indicates the power is connected to the device,
2.
Off = Power is disconnected.
3. Temperature display (heater chambers).
Heating status indicator (heater chambers) Flashing Orange = Below Set point, Solid
4.
Green = Set Point Reached, Flashing Red = Above Set Point.
Temperature selection touch-pads (heater chambers) Adjust Set Point from 35.0°C to
5.
40.0°C.
6. Heating start/stop touch-pad (heater chambers).
7. Gas flow rate display.
Gas flow status indicator Flashing Orange = Purge Cycle, Flashing Red =
8.
Outside Set Point, Solid Green = Set Point Reached.
9. Gas flow rate selection touch-pads Adjust Set Point from 15 to 25 mL/min.
Gas flow start/stop touch-pad Activates Gas Flow when one or both heater
10.
chambers are active.
11. – Gas vent holes.
Patient identification plates.
12. –
1-6
12
7
5
9
8
10
English
12
11
3
5
4
6
1