Operating Modes - Petsafe Petporte smart flap 100 Serie Manual De Instalación

Operating Modes

Normal Mode
This is the default mode on powering the Cat Flap and will allow only your cat(s) to enter.
Night Mode
For a variety of reasons, many pet owners prefer their animals not to go outside at night. The Petporte smart flap ® provides a mode whereby it will
automatically prevent your pet from going outside during hours of darkness and the Cat Flap will automatically unlock when daylight dawns. If your pet is
already outside when darkness falls, the system will still allow the animal to enter.
The Night Mode also allows pet owners to set the specific time of day that they want the unit to lock and unlock (Timer Mode).
To employ this mode, press the Red button for less than 2 seconds and then release it. The unit will beep and the red light will illuminate to inform you that it is
in Night Mode (Timer Mode).
• At the pre-set LOCK time or when darkness falls, the green light will illuminate, indicating that the Cat Flap will be locked.
• At the pre-set UNLOCK time or when dawn arrives, the green light will extinguish, indicating that the Cat Flap will be unlocked.
Note: Night mode can take up to 30 seconds to start functioning.
Vet Mode
If you are intending to take your pet to the vet, or just want it to stay inside, then the Petporte smart flap provides a mode whereby your cat can enter but will
®
not be allowed out again.
To employ this mode, press the Red Button for 5 seconds, or until the red light begins to flash, and then release it. The unit will then beep and the red light will
start to flash, indicating that the Cat Flap is locked and your cat cannot go out.
To exit this mode, press the Red Button again for 5 seconds, or until the red light begins to flash, and then release it. The unit will beep again and the red light
will extinguish.
Extended Modes
The Petporte smart flap has a number of extended modes that allow you to customise the Petporte smart flap to suit your individual needs.
® ®
For information on how to use the Extended Modes please see the Extended Modes section on page 16 of this user guide.
Key Pad Lock
If you wish to lock the buttons on your Petporte smart flap ® (this is helpful in preventing children from adjusting the modes), press and hold the Red Button for
30 seconds. The unit should begin to beep repeatedly. Release the Red Button and the unit will be set to Key Pad Lock.
To re-enable the button controls and disable the Key Pad Lock, repeat the above process.
Erase Mode
If you wish to erase all programmed animal identification numbers from the system's memory, please use the following procedure. However, it must be noted
that once the memory has been erased, you will have to re-program the unit with any animals that are to use the Cat Flap. Therefore, please ensure that you
really wish to erase the memory before proceeding.
To erase all microchip numbers, press and hold both the Red and Green Buttons for 30 seconds. The unit should begin to beep repeatedly. Release both the
Red and Green buttons and the unit should emit a long beep and both lights should begin to flash, indicating that the memory has been erased.
Note: Once the unit's memory has been erased, it will have to be re-programmed before further use!
Reset to Normal Mode
Should you wish to reset your Petporte smart flap back to its Normal Mode and exit modes such as Night Mode, Vet Mode or Open Mode, please use the
®
following procedure.
Press and hold the Green Button for more than 30 seconds, or until the unit emits a series of short beeps, before releasing the button. The unit should emit a
long beep and all lights should extinguish, indicating the Petporte smart flap is in it's Normal Mode of operation. Returning to Normal Mode will not erase
®
your cat's programmed microchip numbers or the variable functions available in the Extended Modes.
Replacement flaps available online 15