Programming Passport ™ Intelligent Cat Flap; Main Menu; Cat Flap Settings; Flap Operational Modes - Petsafe Passport Manual De Adiestramiento

PROGRAMMING PASSPORT INTellIGeNT CAT FlAP
™
The default factory settings programmed for your Cat Flap can be customised to work for you and your pet(s) Programming the Cat Flap can
be done by using the Cat Flap Control Panel or the Computer Application To use the Computer Application, please see "Connecting Cat Flap
to Computer"

Main Menu

This is the default screen on the Cat Flap Also if navigating a lower level menu, the screen will time out and return to Main Menu if there is no
activity after two minutes After five minutes of no activity, the LCD Screen will go to sleep (like a mobile phone or computer) To wake the LCD
Screen and return to Main Menu, push any key on the 5-Button Navigation
Setup: Allows you to change settings for the Cat Flap including flap operational mode, keypad lock, Volume,
date/time, Low Battery Mode, and language Also allows changes to pet settings including pet access mode,
Re-latch Time, In-Tone/Out-Tone, adding a pet, removing a pet, renaming a pet, and relearning a pet
Below Setup each of the successfully programmed pets are also displayed along with each pet's location
(based on when the Cat Flap was last accessed while in Smart Mode) When a pet is selected from this list, a
history of the last 4 dates and times the pet accessed the Cat Flap while operating in Smart Mode is displayed

CAT FlAP SeTTINGS

The Door Settings screen allows you to customise the flap operation and settings of the Passport Intelligent Cat Flap
™
To open the Door Settings menu, from the Main Menu select Setup > Door Settings The Door Settings screen displays the following options:
Door: Allows Cat Flap operational mode to be changed with three mode options: Smart Mode (default factory setting), Open, or Locked
lock Keypad: Allows the 5-Button Navigation to be disabled by setting a
4-digit PIN number
Volume: Turns the Volume on or off for the audible beeps and sounds (such
as In-Tone and Out-Tone) Default factory setting for Volume is On
Date/Time: Sets the date and time used by the Cat Flap
low Battery Mode: When powered by Passport Rechargeable Battery,
™
allows the door flap to be set to the Open or Locked position when battery
runs low and flap shuts down with an optional audible beep Default factory
setting is Off for beep and Locked for flap shut down position
language: Allows the current language to be changed Default factory setting for language is English

Flap Operational Modes

The Cat Flap has three operational modes: Smart Mode, Open, and Locked
Smart Mode: Allows any cat with a programmed FDX-B microchip or Passport
Key to access the Cat Flap as programmed for that specific pet
™
This is the default factory setting
Open: Allows the flap system to remain unlocked so any pet or animal can enter or exit, even pets NOT programmed The Cat Flap will function
like a traditional cat flap in this mode Access Modes, In-Tone, Out-Tone, Pet Location, and Pet Tracking are disabled in Open Mode
locked: Shuts and locks the flap system so no pet can enter or exit, even if programmed to the flap
To Change Flap Operational Mode:
1 From the Main Menu, select Setup > Door Settings then select Door
2 Use right arrow key to scroll through options to select Smart Mode, Open, or locked Press left arrow/back key to return to Main Menu
www.petsafe.net 3