Tools Required; How It Works - Petsafe Petporte smart flap 100 Serie Manual De Instalación

Tools required

•Pencil
•Ruler
•Jig or Keyhole Saw
•Electric Drill
•7 mm Drill bit
During installation great care must be taken using drills or other cutting equipment. If you are at all
in doubt then please hire the services of a qualified professional to fit the Cat Flap for you.
We do not accept any responsibility for openings that are formed or modified in doors, walls or windows. We do not accept any
responsibility for damage caused to doors, walls or windows in the forming or modification of such openings or any costs associated with the repair or
reinstatement of doors, walls or windows.

How it Works

Your Petporte smart flap has been designed to allow your animals easy access to the outside world whilst keeping other troublesome cats out of your house.
®
The Petporte smart flap does not require your animals to wear collars or accessories.
®
The Petporte smart flap ® reads the unique identification number stored on your cat's microchip that your vet has implanted in your animal. Whenever your cat
passes under the porch of the Cat Flap, the system scans the unique number and, if that number matches the number already programmed in for that cat, it will
unlock the Cat Flap and allow the animal to enter. If the animal has not been programmed into the system then the number scanned will not match and the Cat
Flap will remain locked preventing access to your property.
If you are not sure whether your cat has a microchip, then just ask your vet to scan for it. The Petporte smart flap
microchip, the FDX-B (15 digit): it will not read other types of microchips. If you are not sure what type of microchip your cat has, then please either ask your
vet or visit www.petsafe.net and navigate to our Chip Checker microchip compatibility checker to verify that your microchip is compatible.
Whilst the Petporte smart flap works with the most common microchips used in the United Kingdom and Europe (FDX–B 15 digit microchips) there are a
®
small number of cats that have microchips without the necessary range to reliably operate the Petporte smart flap
positions within the cat that the scanner cannot read reliably. In these cases the Petporte smart flap
Therefore, before the Petporte smart flap
assembled, powered up, programmed for your cat and that you have ensured that the unit will work with the microchip in your animal at the same distance as
your cat will be approaching the Petporte smart flap
Please read these instructions fully prior to forming or modifying an opening in your selected door or wall.
We strongly recommend that your Petporte smart flap
microchip in your cat first.
Installation in a Metal Door: Prior to installation it is recommended to check if the Petporte smart flap
do this, hold the assembled and programmed Petporte smart flap
function properly when installed.
6
•Screwdriver
•Tape measure
•Glue
•Sand paper
is actually fitted to the selected door or wall we strongly advise you that your Petporte smart flap
®
® when it is installed.
is assembled, powered up and programmed for your cat and a check made that it works with the
®
up to the metal door and bring your cat up to porch. If the lock releases, the door will
®
www.petsafe.net
® is designed to read the most common type of
® . Occasionally microchips migrate to
can only be used as a Cat Flap without the selective entry.
®
® will operate properly with your metal door. To
unit should be
®