Olympus DS-7000 Manual De Instrucciones página 13

Rec Menu
Mic Sense:
You can switch between two
microphone sensitivities to meet
recording needs: [ Dictation ] for oral
dictation and [ Conference ] which
is suited for situations like meetings
and conferences with a small number
of people.
[ Conference ]:
High-sensitivity mode that records
sounds in all directions.
[ Dictation ]:
Low-sensitivity mode suited for
dictation.
• The setting status will appear on
the display as [ ] or [
Rec Mode:
The recording mode can be set to
[ DSS Pro QP ] (Quality Playback) or
[ DSS Pro SP ] (Standard Playback).
VCVA:
The VCVA feature extends recording
time and conserves memory by
stopping recording during silent
periods, which helps the playback
to be more efficient. When the
microphone senses that sounds
have reached a preset threshold
volume level, the built-in Variable
Control Voice Actuator (VCVA) starts
recording automatically, and stops
when the volume drops below the
threshold level.
1 Select [ On ].
2 Move the slide switch to the
REC ( s ) position to start recording.
• When the sound volume is lower
than the preset actuation sound
level, recording automatically
stops after 1 second
approximately, and [ Standby ]
flashes on the display. The record
indicator light turns on when
recording starts and flashes when
recording pauses.
a VCVA indicator
b Level meter (varies according
to the sound volume being
recorded)
Adjust the start/stop actuation
level:
While the recorder is in recording
mode, press the 9 or 0 button
].
to adjust the actuation level.
• The VCVA level can be set to any of
15 different values.
• The higher the value is, the more
sensitive the recorder can react to
sounds. At the highest value, even
the faintest sound will activate
recording.
• The VCVA actuation level can be
adjusted according to the ambient
(background) noise.
C Start level (moves to the right/
left according to the set level)
• The start/stop actuation level also
varies depending on the selected
microphone sensitivity mode.
• To ensure successful recordings, prior
testing and adjustment of the start/
stop actuation level is recommended.
LCD/Sound Menu
Backlight:
a
By default, the display will remain lit
for about 10 seconds when a button
on the recorder is pressed.
b
1 Select [ Lighting Time ], [ Dim
Light Time ] or [ Brightness ].
2 Select the options.
When [Lighting Time] is selected:
[ 5seconds ] [ 10seconds ] [ 30seconds ]
[ 1minute ]:
Set the backlight duration.
When [Dim Light Time] is
selected:
[ 30seconds ] [ 1minute ] [ 2minutes ]
[ 5minutes ]
[ Always On ]:
Set the time after which the
backlight dims.
When [Brightness] is selected:
[ 01 ] [ 02 ] [ 03 ]:
Sets the brightness of the
backlight when lit.
LED:
You can set it so the record indicator
light does not turn on.
[ On ]:
LED light will be set.
[ Off ]:
LED light will be canceled.
Beep:
When the Beep is set to [ On ], the
recorder will beep in case of error.
c
[ On ]:
Beep is enabled.
[ Off ]:
Beep is disabled.
Language (Lang):
You can set the language for the
recorder's user interface.
[ Čeština ] [ Dansk ] [ Deutsch ]
[ English ] [ Español ] [ Français ]
[ Nederlands ] [ Polski ] [ Русский ]
[ Svenska ]:
• The languages available may vary
depending on the country/region
where the product is purchased.
13