Advanced Settings - Wolf Garten Ambition Robo Scooter 300 Instrucciones De Servicio

• If more than one zone is defined, then first scroll to select the zone you want to edit and set the area for that
zone as described above.
Names of zones are as follows:
L1 – Main Zone
L2 – Separated Zone A
L3 - Separated Zone B

6.4.2 Advanced Settings

The Advanced Settings are additional menu options that are not changed very often and thus are not included in the Basic
Settings.
• To change any option/feature in the Advanced Settings, press the 'Settings' button continuously for 3 Sec.
• 'P001'is displayed. Use the arrows to scroll to the setting you want to change, then press OK.
• Use the arrow button to change the setting and press OK to confirm.
• Scroll to change additional menu options or press STOP to go back to the main display.
Below are the Advanced Settings options:
P001
(Default = 3)
P002
(Default = OFF)
74
• Controls the Interval (frequency) of mowing cycles in the zone.
• The default Interval is Twice a week. It means that the unit will
complete the entire mowing of your lawn twice a week (2 Mowing
Cycles every week).
• The numbers in the menu represent the following:
2 – Every two days
3 -Twice a week
7 - Once a week
14 - Every two weeks
• If there is more than one zone, the Interval can be set for all zones
together or for each zone individually. You can choose All for all
Interval
zones or scroll to the zone you want to change and change its setting.
• During off-season when the growth rate of the grass is slower, it is
recommended to change the Interval to 'Once a Week' or 'Every Two
Weeks'. This resting period helps the grass and prolongs the lifetime
of the mower.
• Grass growth rate changes during the year (depending on temperature,
grass type, fertilizing and etc.).
• High fertilization and favorable weather conditions may cause the
grass to grow faster. In such cases, use the Interval option to decrease
the time between cycles.
• The minimum Interval is Every 2 Days, but it is available only for
relatively small areas, where the mower can complete mowing the
area within 2 days.
• In rare cases, you may notice that the mower circles a Perimeter Island
Island
unnecessarily while searching for the Base Station.
• The Islands option helps overcome this situation. To avoid such cases,
turn the Islands feature On.
2/3/7/14
On/ OFF
en