Bonding And Componeer Brilliant Pretreatment - Coltene COMPONEER BRILLIANT Instrucciones De Uso

3.9. BONDING AND COMPONEER BRILLIANT PRETREATMENT

Pretreatment of enamel and dentine areas
Dispense One Coat Bond SL directly onto the brush, apply evenly to enamel and dentine areas, leave for at
least 20 s and then blow-dry gently with oil-free air in the cervical to incisal direction. Then cure One Coat
Bond SL for 20 s (>800 mW/cm²) or 30 s (<800 mW/cm²).
NOTE
Before light-curing transparent matrices must be placed in the interdental spaces to prevent the teeth from stick-
ing together. If it is not specifically necessary to break the contact point, we recommend not using interdental
wedges to ensure as optimum wetting as possible or free space for modelling.
Protect tooth from moisture, finger prints and any other possible contamination.
Pretreatment of the COMPONEER BRILLIANT
Additional roughening is not necessary, because the COMPONEER BRILLIANT has a microretentive internal
surface
NOTE
Protect COMPONEER BRILLIANT from moisture, finger prints and any other possible contamination. If the
COMPONEER BRILLIANT is contaminated following a repeat fitting in the mouth, decontamination of the
interior surface by wiping the inner surface with 70% ethanol solution (alcohol) is recommended. Then dry
COMPONEER BRILLIANT with air.
16