Positioning Of The Machine - OEM BM/2/AS Manual De Uso Y Mantenimiento

BM/2/AS
Installation and connections
Chapter 3
DANGER
All operations described in this chapter shall be
carried out by skilled technicians.
3.1 - POSITIONIG OF THE MACHINE (Fig. 1-2-3)
• Position the rounder (1) in the final place of installation
and screw the feet (2) into the base.
• Level the rounder by adjusting the feet (2).
• Run two straps (3) underneath the divider body (4) and
up the sides and hook them onto the forks of a forklift
truck.
• Lift the machine (4) and remove the rear feet (5).
• Position two pieces of wood (6) on the rounder (1) and
rest the divider (4) on them centring the two front feet
(5) in the upper groove of the rounder (1).
• Remove the straps (3) and remove the two pieces of
wood (6) one at a time, resting the divider (4) on the
rounder (1).
FIG. 1
2
FIG. 2
3
4
5
1
1
2
3
5
6
GB - 11