BM/2/AS
Installation and connections
3.2 - COMPONENT ASSEMBLY (Fig. 5)
With the machine off:
• Raise the door (1).
• Open the interior door (2).
• Loosen the knobs (3) and fit the cone (4) turning it in
the direction indicated by the arrow "A", then lock the
cone (4) into place by tightening the knobs (3).
• Open the drawer (5) and fit the bell (6) on the rotary
plate (7).
• Check that the ring nuts (8) are completely unscrewed,
then fit the hook (9) onto the pins (10) turning the bell
(6) in the direction indicated by the arrow "B" until it
locks into place.
1
5
A
3
8
B
10
9
FIG. 5
2
3
4
3
6
7
GB - 13
4
3
3
5