Maintenance And Troubleshooting; User Tips; Maintenance - Thermor IAC/S 300 Instrucciones De Instalacion Y De Uso

Product Overview
1.

User Tips

In case of prolonged absence and especially during winter, flush your unit by following this procedure:
I.
III.
In case of malfunction, lack of hot water, steam release when drawing hot water, turn power off (during summer) and
contact the installer.
2.

Maintenance

To maintain your water heater performance, regular maintenance is required.
By the USER:
What
Safety unit
Overall condition
The power to the device must be turned off before opening the electrical compartment cover and
the top cover.
By A PROFESSIONAL:
What
Electrical wiring
Electric booster pump
Scaling
Corrosion protection
For wall-hung products, the magnesium anode is mounted on the electric booster pump, it is
required to flush the water heater before replacing it.
Réf doc : U0570659_#
Installation Operation

Maintenance and Troubleshooting

When
Once or twice a month
Once a month
When
Once a year
Once a year
Every 2 years
Every 2 years
Maintenance and
Troubleshooting
II.
IV.
How
Operate the safety valve.
Check for proper flow.
Check the overall condition of your device: make sure there's
no water leakage at the fittings...
How
Check if no loose wire within internal and external wiring and
all connectors are in place.
Check if the electric booster pump is operating properly by
measuring the power.
In case of hard water circulating through the water heater,
descaling is required.
Check the magnesium anode and replace it if necessary.
Warranty
Page 30/ 220